If you're planning a new kitchen, a bathroom or a whole house, there are three ways to get it done. You can hire the trades and run it yourself, you can use a general builder, or you can use a design-and-build firm. All three work. They suit different people and different jobs, so this is how they compare.
Hiring your own trades
You find a plumber, an electrician, a tiler, a plasterer and a decorator, and you book them in the right order. You choose and buy everything yourself, from the tiles to the taps.
It can be the cheapest way on paper, because nobody is charging to manage it. Managing it becomes your job. You work out who goes first, you chase the tiler when the plasterer runs over, and you sort it out when two trades each say a problem is the other one's.
It suits a small, simple job and someone with time in the day and a bit of experience. On a full bathroom or kitchen it's a lot to take on.
A general builder
A builder takes on the whole build and brings their own trades, so you have one person to deal with on site. It's a common way to get an extension or structural work done.
What a builder usually doesn't do is the design. They build what's on the drawings, so someone has to produce those first. You'll normally choose and supply the kitchen, the bathroom fittings and the finishes as well. If the units turn up late, or don't fit the room as it was built, that's between you, the supplier and the builder to sort out.
It suits you if you already have drawings you're happy with and you know what you want to buy.
A design-and-build firm
One company designs the room, supplies what goes in it and builds it. That's how we work. Alex designs the space in 3D, so you see the layout, the tiles and the finishes together before anything is ordered. We supply the kitchen or bathroom. Then our trusted tradesmen build it, with Matt managing the job every day.
Because the people who drew it are the people building it, problems get picked up on the drawing and not on site. And if something isn't right, there's one company to call.
We don't take on jobs where the kitchen or bathroom has been bought somewhere else and only needs fitting. We design it, supply it and install it.
It isn't the cheapest route. You're paying for the design and for someone to run the job properly. It also isn't worth it for a like-for-like swap, where you only want the old bath out and a new one in.
Which one is right for you
- Your own trades: a small job, and you have the time and know-how to run it.
- A builder: you already have the drawings and you're happy choosing and buying everything.
- Design and build: you want the room designed around you, and one company answerable for all of it.
How we start
We start with a free 15-minute call about your space and your budget, and we'll tell you honestly if we're the right fit. If we are, you get a clear fee proposal before any design work begins.
You can see how it works on a real job in our Greystone Avenue kitchen, which was part of a full home renovation, or our Southview Road kitchen, where the drawings are shown alongside the finished room.
More on this: Full Renovations